LanParty NFII Ultra A+ User Manual page 60

3
Award BIOS Setup Utility
3.1.2.10 Typematic Rate (Chars/Sec)
This field allows you to select the rate at which the keys are
accelerated.
3.1.2.11 Typematic Delay (Msec)
This field allows you to select the delay between when the key was
first depressed and when the acceleration begins.
3.1.2.12 Security Option
This field determines when the system will prompt for the password
- everytime the system boots or only when you enter the BIOS
setup. Set the password in the Set Supervisor/User Password
submenu.
System The system will not boot and access to Setup will be
Setup
3.1.2.13 APIC Mode
The default setting is "Disabled". Set this field to "Enabled" to
configure the next field - MPS Version Control For OS.
3.1.2.14 MPS Version Control for OS
This field is used to select the MPS version used by the system.
3.1.2.15 HDD S.M.A.R.T. Capability
The system board supports SMART (Self-Monitoring, Analysis and
Reporting Technology) hard drives. SMART is a reliability prediction
technology for ATA/IDE and SCSI drives. The drive will provide suffi-
cient notice to the system or user to backup data prior to the
drive's failure. The default is Disabled. If you are using hard drives
that support S.M.A.R.T., set this field to Enabled. SMART is sup-
ported in ATA/33 or later hard drives.
60
denied unless the correct password is entered at the
prompt.
The system will boot, but access to Setup will be denied
unless the correct password is entered at the prompt.