Table of Contents
Advertisement
Chapter 3
[5]
[1]
[3]
7) Disconnect the 2 connectors [1].
8) Remove the 2 screws [2], and detach the DCNT board [4] from the
plate [3].
[4]
3.1.10 Power Supply PCB
3.1.10.1 Removing the Left Cover
FAX-L100 / FAX-L120
1) Open the document feeder tray [1].
2) Open the cartridge cover [2].
3) Remove the 2 screws [3].
4) Free the 4 claws [4], and detach the Left cover [5] in the direction of
the arrow [A]; then, slide it in the direction of the other arrow [B].
[3]
[A]
[5]
[4]
3-10
[1]
[4]
[2]
F-3-45
[1]
[2]
[3]
F-3-46
0010-3395
[2]
[1]
[B]
F-3-47
3.1.10.2 Removing the Power Supply Board
FAX-L100 / FAX-L120
1) Disconnect the 2 connectors [1].
2) Remove the 5 screws {2], and detach the power supply board [3].
[2]
[3]
3.1.11 High-voitage Power Supply PCB
3.1.11.1 Removing the Right Cover
FAX-L100 / FAX-L120
1) Open the document feeder tray [1].
2) Open the cartridge cover [2].
3) Remove the screw [3].
4) Free the 3 claws [4], and open the right cover [5] in the direction of
the arrow [A].
5) Free the claws [6], and detach the right cover [5].
[1]
[6]
3.1.11.2 Removing the Left Cover
FAX-L100 / FAX-L120
1) Open the document feeder tray [1].
2) Open the cartridge cover [2].
3) Remove the 2 screws [3].
4) Free the 4 claws [4], and detach the Left cover [5] in the direction of
the arrow [A]; then, slide it in the direction of the other arrow [B].
0010-3396
[1]
[2]
F-3-48
0010-3398
[2]
[4]
[3]
[A]
[4]
[5]
F-3-49
0010-3399
Advertisement
Table of Contents
