Table of Contents
Advertisement
As a rule, do not touch or clean the part. If absolutely necessary, be sure to take full care not to touch the roller and bring solvent or oil into contact with
the roller.
Cleaning must be dry-wiping with lint-free paper. Never use water or solvent.
[2] Fixing Entrance Guide
Dry wipe with lint-free paper.
[3] Static Eliminator
Clean with a brush.
[4] Pickup Roller
Dry wipe with lint-free paper.
[5] Separation Pad
Dry wipe the rubber portion with lint-free paper.
[6] Feed Roller
Dry wipe with lint-free paper.
* Do not touch the sponge portion of the transfer charging roller. Otherwise, the back of paper may become soiled or the image may suffer dropouts
(white spots).
* Never use solvent.
* If the use of lint-free paper fails to remove dirt or the roller is deformed, replace
Chapter 4
4-5
Advertisement
Table of Contents
