Table of Contents
Advertisement
Chapter 3
3.5.5.7 Removing the Upper Cover
FAX-L100 / FAX-L120
1) Remove the screw [1].
2) Free the claw [2], and detach the upper cover [3] in the direction of
the arrow.
[1]
[2]
3.5.5.8 Removing the Reader Unit
FAX-L100 / FAX-L120
1) Disconnect the 3 connectors [1].
2) Remove the screw [2].
3) Free the harness [4] from the clamp [3].
4) Remove the 3 screws [5], and detach the reader unit [5].
[6]
[5]
[4]
[4]
[5]
3.5.5.9 Removing the DCNT board
FAX-L100 / FAX-L120
1) Remove the 2 screws [1], and detach the DCNT cover 1 [2].
2) Remove the 2 screws [3], and detach the DCNT cover 2 [4].
3-46
0010-3629
[3]
F-3-224
0010-3630
[3]
[3]
[2]
[1]
F-3-225
0010-3631
[3]
[1]
3) Remove the flat cable [1].
[1]
4) Remove the 2 flat cables [1].
5) Free the harness [3] from the guide [2].
6) Remove the screw [4], and turn over the DCNT board [5].
[5]
[1]
[3]
7) Disconnect the 2 connectors [1].
8) Remove the 2 screws [2], and detach the DCNT board [4] from the
plate [3].
[4]
[3]
[2]
F-3-226
F-3-227
[1]
[4]
[2]
F-3-228
Advertisement
Table of Contents
