Features - Seagate STT20000A Product Manual

Introduction

Features

STT20000A Product Manual
Figure 1-2
Internal STT20000A with mounting brackets
The STT20000A embodies Seagate 's commitment to engineer reliable and durable
tape drive products. Key features of the drive are as follows:
•
Internal form factor for installation in a 5.25-inch half-high or 3.5-inch by one-
inch space
•
Capability to write and read Travan TR-5 (QIC-3220-MC) media, as well as read
TR-4 media conforming to the QIC-3095 standard
•
QIC-3220-MC tape format compliance for compatibility and information
interchange
•
Typical uncompressed capacities of 10 gigabytes on 740 foot TR-5 media
•
Typical compressed capacities of 20 gigabytes on 740 foot TR-5 media
•
Transfer rate optimized with FastSense —automatic selection of fastest
supportable data transfer rate (1,000, 733, or 489 Kbyte/sec)
•
ATAPI interface that supports DMA and PIO modes 0, 1, or 2 with 512 Kbytes
on-drive data buffer to facilitate the most efficient use of the host computer and
tape drive.
•
Uncorrectable error rate of less than 1 in 10
•
Flash EEPROM to enable electrically upgradeable drive firmware
•
Custom Seagate -designed LSI circuitry to reduce component count and boost
drive reliability
•
Low power consumption—less than 15.0 Watts (typical) for internal drives
15
bits
Chapter 1
Page 3