Recommended Tapes; Regulatory Compliance - Seagate STT20000A Product Manual

Specifications

Recommended tapes

Regulatory compliance

STT20000A Product Manual
The STT20000A uses pre-formatted minicartridges. The following cartridges are
recommended:
Description
Travan—740 ft (QIC-3220-MC)
10.0 GB capacity
(20.0 GB capacity with data compression)
Note. The STT20000A reads and writes the QIC-3220-MC format.
The STT20000A reads (but does not write) the QIC-3095-MC format.
The STT20000A complies with the regulations listed in the following table.
Agency
CSA
TUV & IEC-RHEINLAND
UL
Canadian Dept. of Communications
EN55022 (CISPR-22)
with additional CE-Mark test requirements
FCC
Use the STT20000A only in equipment where the combination has been determined
to be suitable by an appropriate certification organization (for example, Underwriters
Laboratories Inc. or the Canadian Standards Association in North America). You
should also consider the following safety points.
•
Install the drive in an enclosure that limits the user's access to live parts, gives
adequate system stability, and provides the necessary grounding for the drive.
•
Provide the correct voltages (+5 VDC and +12 VDC) based on the regulation
applied—Extra Low Voltage (SEC) for UL and CSA and Safety Extra Low
Voltage for BSI and VDE (if applicable).
Seagate 3M/Imation
20000TT TR-5
Regulation
C22.2, No. 950-M89
EN 60 950/IEC 950
1950
Class B
Class B
Class B, Part 15
Chapter 2
Page 13