Beam, Replacement Of Short Pivot Arm - Braillo 400 S 3 Series User Manual

B 400 Series 3
BRAILLO NORWAY AS
●

4.11 Beam, replacement of short pivot arm

Please see the fi gures below:
1. Remove the two screws
as indicated on the fi gure.
Pull out the short pivot
arms, there are 21 pcs. on
each shaft.
2. Pull out the shaft, and
replace the short pivot
arm(s).
Assembly is done in
reverse order.
Note! When putting the
short pivot arms back into
the beam, be sure that the
printing pins are hanging
like in the fi gure. This is
to make room for the short
pivot arm.
58