Beam, Replacement Of Printing Pin - Braillo 400 S 3 Series User Manual

B 400 Series 3
BRAILLO NORWAY AS
●

4.12 Beam, replacement of printing pin

Please see the fi gures below:
Remove the six screws as
indicated in the fi gure.
Note! Before the parts are
separated, make sure that
the beam is held with
the printing pins hanging
down.
Place the pinguide with
the pins on a table, do not
turn it upside down or all
the pins will fall out!
Now the defect printing
pin can be replaced.
Assembly is done in
reverse order.
59