Magnet Rack Disassembly, Step By Step - Braillo 400 S 3 Series User Manual

B 400 Series 3
BRAILLO NORWAY AS
●
4.4 Magnet rack, disassembly, step by step.
There are two main reasons for disassembling the magnet rack.
It could be to replace some parts, i.e. a defect magnet, a worn
pivot arm, or it could be for regular maintenance.
The magnet racks canbe concidered as the parts of the printer
that will have the greatest infl uence on the dot quality, so it is
very important to know how to deal with them.
Take the magnetrack out of the printer like described in chapter 4.3 "Magnet rack, removal".
Next, follow the instructions below.
Step 1.
Remove the two bolts holding the spongelist, and then remove the spongelist.
Spongelist
41