Program (P) Exposure Mode; Aperture Priority (A) Exposure Mode - Konica Minolta DiMAGE Z20 Instruction Manual

DiMAGE_Z20_English_B412.qxd

PROGRAM (P) EXPOSURE MODE

APERTURE PRIORITY (A) EXPOSURE MODE

As the lens is zoomed, the maximum aperture will automatically shift. If the aperture
value is beyond the shutter-speed range, the shutter-speed display will turn red on the
monitor.
36
A
DVANCED RECORDING
04.12.27 16:52
The program exposure mode controls both the shutter speed and
aperture to ensure correct exposures. This exposure mode allows
photographers to shoot without worry about exposure settings. The
shutter speed and aperture values of the exposure are displayed on the
monitor when the shutter-release button is pressed partway down. If
shutter speed and aperture displays turn red, the scene is beyond the
exposure control range of the camera.
The photographer selects the aperture and the camera sets the
appropriate shutter speed to ensure the correct exposure. When aperture
priority is selected, the aperture value on the monitor turns blue and a
double arrow indicator appears next to it. The flash mode can be set to
fill-flash, fill-flash with red-eye reduction, or slow sync. with red-eye
reduction (p. 26).
1
Page 36
Use the up/down keys of the controller (1) to
set the aperture. The aperture has a three stop
range. Press the shutter-release button
partway down to activate the exposure system;
the corresponding shutter speed will be
displayed on the monitor.