Uninstalling The Driver Software - Windows - Konica Minolta DiMAGE Z20 Instruction Manual

DiMAGE_Z20_English_B412.qxd

UNINSTALLING THE DRIVER SOFTWARE - WINDOWS

1.Connect the camera to the computer with the USB cable. Other devices must not be
connected to the computer during this procedure.
2.Right click on the My-computer icon. Select "properties" from the drop-down menu.
Windows ® XP: from the start menu go to the control panel. Click on the performance
and maintenance category. Click "System" to open the system properties window.
3.Windows ® 2000 and XP: select the hardware tab in the properties window and click the
device-manager button.
Windows ® 98 and Me: click the device-manager tab in the properties window.
4.The driver file will be located in the universal-serial-bus-controller or other-devices
location of the device manager. Click on the locations to display the files. The driver
should be indicated with the camera name. Under certain conditions, the driver name
may not contain the camera name. However, the driver will be indicated by either a
question mark or exclamation point.
5.Click on the driver to select it.
6.Windows ® 2000 and XP: click on the action button to display the drop-down menu.
Select "uninstall." A confirmation screen will appear. Clicking "Yes" will remove the
driver from the system.
Windows ® 98 and Me: click the remove button. A confirmation screen will appear.
Clicking "Yes" will remove the driver from the system.
7.Disconnect the USB cable and turn off the camera. Restart the computer.
04.12.27 16:57 Page 107
107