Turning On The Camera And Displays - Konica Minolta DiMAGE Z20 Instruction Manual

DiMAGE_Z20_English_B412.qxd

TURNING ON THE CAMERA AND DISPLAYS

Press the main switch to turn the camera on. Pressing the switch again
turns the camera off.
Around the main switch is the mode switch. This switch is used to
change between the recording and playback modes as well as the
selecting the between the monitor and viewfinder display.
Camera notes
To use the viewfinder in the playback mode, press and
hold the flash mode button (1) and then press and hold
the information (i
to the viewfinder position.
04.12.27 16:51 Page 17
Recording mode (Viewfinder display) - the camera can
record images and the monitor is viewed through the
viewfinder. The viewfinder has a built-in diopter. While
looking through the viewfinder, turn the diopter-
adjustment dial until the monitor image is sharp
Recording mode (Monitor display) - the camera can record images
and the monitor is viewed directly.
Playback mode (Monitor display) - images can be played back and
edited. The monitor is viewed directly.
+ ) button (2) until the monitor switches
1
2
17