ABOUT FULL-AUTO PROGRAM
Full-auto program completely automates the picture-
taking process. When the function dial is turned to or
from this position, the following are reset:
Flash mode (p. 24)
Focus area (p. 46)
Focus mode (p. 47)
Drive mode (p. 32)
Exposure mode (p. 38)
Exposure compensation (p. 42)
Exposure bracketing (p. 48)
Multiple exposure (p. 48)
EXPOSURE WARNING - PROGRAM
In bright conditions, use a neutral density filter on the lens, load a
slower film, or, if using artificial lights, reduce the intensity of the
illumination. In dark conditions, use the built-in flash or load a faster
film.
When using full-auto program, subject
programs, or program exposure, if the
required exposure is beyond the shutter
speed and aperture range, the shutter
speed and aperture displays blink on the
data panel. One of the viewfinder
exposure indicators blink to show if the
displayed
exposure
underexposure (<) or overexposure (>).
Autoflash
Wide focus frame
AF
Single-frame advance
P
0.0
Off
Off
will
cause
37