DiMAGE_Z20_English_B412.qxd
04.12.27
16:57
Page 88
LCD MONITOR BRIGHTNESS
Monitor brightness can be adjusted in 11 levels.
Brightness can be set individually for viewfinder
and direct viewing in the recording mode. Turn the
mode switch to the appropriate position before
opening the brightness option in section 1 of the
setup menu (p. 87). Also see page 28.
Set LCD brightness
Use the left/right keys of the controller to adjust
Low
High
brightness,
the
monitor
image
changes
accordingly. Press the central button of the
controller to set the level.
:adjust
:enter
AUTO POWER SAVE
To conserve battery power, the camera will shut down if no operation is made within a
certain period. The length of the auto-power-save period can be changed to 1, 3, 5, or 10
minutes. When the camera is connected to a computer, the auto-power-save period is
fixed at ten minutes. Auto power save is set in section 1 of the setup menu (p. 87).
88
S
ETUP MENU