Changing The Memory Card - Konica Minolta DiMAGE Z20 Instruction Manual

DiMAGE_Z20_English_B412.qxd

CHANGING THE MEMORY CARD

This digital camera is equipped with a internal storage (approximately 14.5MB) so
images can be recorded without a memory card. For increased memory capacity, an SD
Memory Card or MultiMediaCard can be inserted into the camera. When card is inserted,
the images are recorded on the card. For more about memory cards see page 118.
1
1.Insert the memory card all the way into the card slot and release; the card should catch
in the slot. Insert the card so the face is toward the back of the camera. Always push
the card in straight, never at an angle. Never force the card. If the card does not fit,
check that it is oriented correctly.
2.To eject a memory card, press the card into the slot and release. The card can then be
pulled out. Take care when removing the card as it becomes hot with use.
A memory card used in another camera may have to be formatted before being used. If
the unable-to-use-card message appears, the card should be formatted with the camera.
A memory card can be formatted in section 1 of the playback menu (p. 74). When a card
is formatted, all the data on the card is permanently erased. If the card-error message
appears, press the central button of the controller to close the window; check the Konica
Minolta web site for the latest compatibility information:
North America:
Europe:
16
G
ETTING UP AND RUNNING
04.12.27 16:51 Page 16
Always turn off the camera and confirm the access lamp is not lit
before inserting or removing a memory card; damage and data loss
may result.
http://kmpi.konicaminolta.us
http://www.konicaminoltaeurope.com/
2