Drive Modes - Konica Minolta DiMAGE Z20 Instruction Manual

DiMAGE_Z20_English_B412.qxd

DRIVE MODES

Single-frame advance - to take a single image each time the shutter-release
button is pressed (p. 22).
Self-timer - to delay the release of the shutter. Used for self-portraits.
Continuous advance - to take multiple images when the shutter-release button
is pressed and held.
Progressive Capture - to continuously record when the shutter-release button
is pressed and held. Releasing the button saves the last six images.
Bracketing - to take a series of three images with differing exposures.
04.12.27 16:52 Page 45
The drive modes control the rate and method images are
captured. The drive mode is set on all menus except the
movie menu. In auto recording mode, the drive mode is reset
to single-frame advance when the exposure-mode dial is
moved to another position or the camera is turned off. In
Digital Subject Programs and P, A, S, and M exposure
modes, the drive mode remains in effect until changed. Refer
to the following sections for descriptions of the drive modes.
45