Focus Signal; Shutter Fx; Video Output; Transfer Mode - Konica Minolta DiMAGE Z20 Instruction Manual

DiMAGE_Z20_English_B412.qxd 04.12.27 16:57 Page 96

FOCUS SIGNAL

When the shutter-release button is pressed partway down, an audio signal confirms the
AF system has focused. The focus signals can be changed or turned off in section 3 of
the setup menu (p. 87). Two tones are available.

SHUTTER FX

When the shutter is released, a shutter sound effect gives a positive confirmation a still
image is recorded. The sound effect can be turn off in section 3 of the setup menu (p.
87). Two shutter effects are available.

VIDEO OUTPUT

Camera images can be displayed on a television (p. 84). The video output can be
changed between NTSC and PAL in section 4 of the setup menu. North America uses the
NTSC standard and Europe uses the PAL standard. Check which standard is used in
your region to play back images on your television set.

TRANSFER MODE

The data-transfer mode must be specified depending on whether images are transferred
to a computer or printed directly. The data-storage option must be selected to transfer
data from the camera to a computer or when using the DiMAGE Viewer software. The
PictBridge option allows images to be printed directly from the camera with a PictBridge
compatible printer (p. 108).

SELF-TIMER

The self-timer delay period can be changed in section 4 of the setup menu (p. 87). Two
delay periods are available, 10 seconds and 2 seconds.
96
S
ETUP MENU