Manual (M) Exposure Mode - Konica Minolta DiMAGE Z20 Instruction Manual

DiMAGE_Z20_English_B412.qxd

MANUAL (M) EXPOSURE MODE

The changes made to the exposure will be visible in the live image on the monitor. The
monitor shutter-speed and aperture display will turn red if the image is significantly
underexposed or overexposed. If the monitor is black, increase the exposure until the
image is visible; decrease the exposure if the monitor is white. When the shutter-release
button is pressed partway down, the brightness of the live image may change while the
camera focuses.
In manual exposure mode, the auto camera-sensitivity setting will fix the ISO value at
100. The camera sensitivity can be changed in section 3 of the recording menu (p. 59).
The flash mode can be set to fill-flash, fill-flash with red-eye reduction, or slow sync. with
red-eye reduction (p. 26), but the live image will not reflect the flash exposure.
38
A
DVANCED RECORDING
04.12.27 16:52
Manual exposure mode allows individual selection of shutter speeds and
apertures. This mode overrides the exposure system giving the
photographer total control over the final exposure.
Use the up/down keys of the controller to change
the shutter speed.
Use the left/right keys of the controller to change the
aperture.
Page 38