Samsung SVMi-4 Technical Manual And User Manual page 71

Programming - Page 60
sive "Talk Off" problems are experienced during recording operations, the value
should be increased. Talk Off occurs when a human voice emulates a DTMF tone.
If users frequently experience difficulty in stopping recording (as evidenced by
touch tones being included in the recordings), this value should be reduced.
This parameter is expressed in hundredths of a second. The default is 7 (70 ms).
NOTE: Drastic changes of this value are not recommended. A small change can
make a significant difference. This parameter has no effect during playback.
DTMF Cutout Period If, during prompt playback, the DTMF detector senses a
tone, the SVM will temporarily suspend playback for the time period specified
by this parameter. If the tone remains valid during this time, it is considered to
be a valid caller entry and playback is stopped. If the tone becomes invalid
while playback is temporarily suspended, it is considered to be "Talk Off" and
playback is resumed. This value is expressed in hundredths of a second. The
default is 1 (10 ms).
NOTE: This parameter has no effect during recording.
*Outbound DTMF Duration This parameter controls the duration of tones
dialled by SVM. Tone Duration sets the duration of each tone dialled. This
value is expressed in hundredths of a second. The default is 8 (80 ms).
*Outbound Inter-Digit Time These parameters control the duration of tones