Assign Station Group - Samsung SVMi-4 Technical Manual And User Manual

Samsung
SVMi-4 & SVM-400 Manual
MMC: 601
DESCRIPTION:
This MMC is used to build all station groups except the operator group (for the opera-
tor group see MMC 600).
The options for setting up these groups will be some or all of the following:
A. TYPE: This is the type of group you are creating and can be one of the following:
1. NORMAL: Used to assign stations in a ring group. The members can be
stations, common bell contacts or Ring over Page relays.
2. VMAA: Used to group a number of voice mail port extensions. Check all
programming in MMC 726 (VM/AA Options) to ensure that the In-band DTMF
codes are properly set.
3. AA: Used to group a number of AA ports. An AA card must be installed in the
system to do this.
4. CADENCE or BI-VMS: This is the voice mail group.
5. S0: Allows S0 ports to be members of a station group.
6. UCD: Used to build a UCD group. Two methods of UCD are supported:

ASSIGN STATION GROUP

Programming
MMCs