Assign Vm Moh - Samsung SVMi-4 Technical Manual And User Manual

Samsung
SVMi-4 & SVM-400 Manual
MMC: 756
DESCRIPTION:
This MMC is used to assign each Music-On-Hold source for the keyphone system
from a sound file located on the SVM flash module. The 100 available sound files
are defined as numbers 5000 to 5099, but are referred to in this MMC as 00-99.
First, record the sound file. Then assign the sound file to a voice mail port. For exam-
ple, if you record sound file 5025 you would associate 25 with a specific SVM port,
e.g. 225. This will dedicate the port for use only as MOH and remove it from the
VM group. Now 225 will show up as a valid music source in MMCs 308, 309 and 408.
Each MOH source assigned here requires one dedicated SVM port / channel.
Note: If the first SVM port is used for VM MOH, it must be disabled before boot-up
since the SVM and keyphone system use port 1 during boot-up to exchange critical
information. It is suggested that you use the last port(s) as VM MOH ports.
PROGRAM KEYS
KEYPAD
SPK
HOLD
UP & DOWN
Used to enter VM port or sound file number
Used to store data and advance to next MMC
Used to delete an entry
Used to select VM port or sound file number
Programming

ASSIGN VM MOH

MMCs