Bryston SP3 Manual page 53

APPENDIX J: FIRMWARE UPLOAD INSTRUCTIONS continued
5. Click on the "Upload Image File (.bin)" button to open the next screen:
6. Click on "Browse" button to select the file, and type the path and name of the
firmware file (case-sensitive). For example:
ftp://bryston.com/pub/firmware/sp3/current/SP3.bin
or, pick the same file from a local directory in your PC, providing that it has already
been copied there, for example:
c:/tmp/SP3.bin
The file name should appear in the "File name" line as below, then click "Open" or
press Enter. to accept selection.
"File Package Upload" page of the SP3.
"
Choose File to Upload" window (will close when Open is clicked)
SP3 Software Upload Instructions
SP3 PREAMP / PROCESSOR
Page 2 of 6