Appendix E: Usb Guide - Bryston SP3 Manual

SP3 PREAMP / PROCESSOR
APPENDIX E
USB GUIDE
SP3 – User's Instructions for USB
(2012-07-31, Stan B ., Bryston Ltd .)
USB port (Revision 1 .1) in the SP3 emulates the streaming receiver device . It allows receiving a
digital sound stream from a host device such as a PC, originating from a file or internet, and
playing it through SP3 audio processor .
Initiating a USB connection with a PC (Windows 7).
Make sure SP3 is connected to a power source but in Standby. When the USB cable
connecting SP3 is plugged to a USB port in a PC and SP3 is taken out of Standby, a
message Driver Software Installation is produced in the system tray area. Clicking on it
opens up the following message window:
Message screen on USB connection event.
Device Manager window (Control Panel).
See BRYSTON SP3 item under "Sound, video and game controllers" section. If this is
not present as illustrated above, then the SP3 USB port is not connected or not recognized
by the operating sustyem.
SP3 USB User Guide Page 1 of 3