Bryston SP3 Manual page 25

APPENDIX B: RS232 SERIAL CODES continued
0c: AAC (MPEG4,MPEG2,iPhone,
iPod,iPad,NintendoDSi,
iTunes,DivX,PS3,PSP,
SonyWalk,phones,Wii.
0d: MPEG (MPEG1 Layer 1 and 2)
0e: DTS12 (DVD IEC Type 12)
0f: DTS13 (DVD IEC Type 13)
10: DTS14 (CD 14-bit)
11: DTS16 (CD 16-bit)
12: WMP (WMA Pro)
13: MP3
14: DSD1 (SACD 1bit)
15: DSD2
16: DSD3
17: DDP (Dolby Digital Plus)
18: DTS HD or Master
19: Dolby TrueHD
1a: DXP (DTS Express)
AFMT Query Input Format PFMTxxxxxxxx
(Program Format)
QS Query, returns program format
as 8 digit hex value, bit-flags:
BIT0 - Left
BIT1 - Right
BIT2 - Center
BIT8 - single surround
BIT9 - dual surround
BIT10 - single back
BIT11 - dual back
BIT12 - Low Freq Effects
BIT13 - Dual Subwoofer (not supp)
BIT16 - Not Stereo Surround-Encoded
BIT17 - Yes Stereo Surround-Encoded
BIT18 - Not Back Surround-Encoded
BIT19 - Yes Back Surround-Encoded
BIT20 - Mono
BIT21 - Dual Mono
BIT24 - Karaoke (not supp)
RATE Query Input Sample RATExxxxxx
Rate of the bit stream
(Frame Rate)
QS Query, returns sample rate
in Hz (000000=unknown).
VFMT Query Video Input VFMTxx
Format
QS Query, returns video timing and
format code xx in hex.
*** See helpvfmt.txt document. ***
VCOL Video color depth VCOLxx
QS query, response xx=
00: AUTO
08: 3x8 bit
0a: 3x10 bit
0c: 3x12 bit
10: 3x16 bit
fe: not applicable
ff: unknown
VCPP Copy protection VCPPxx
status
QS query, response xx=
00: none
01: HDCP
02: Macrovision
80: AUTO
81: ON
ff: unknown
OUTP Query Output Format OUTPxxxxxxx
(Listening Format)
QS query, returns listening
format as 3 chars:
n.w
or as 7 char string:
f/s/b.w
INFO Query system info INFOxxx...xx
QS Query, returns system
data in as a long
string (typ <300 chars)
broken into 22
<LF>-delimited lines
(code 10 or '\n'),
as follows:
#10INFO<LF>
01:%8s<LF> {PRODUCT NAME}
02:%8d<LF> {SERNUM}
03:%8d<LF> {MANUFDATE}
04:%12s<LF>{SOFTWARE REV}
05:%8s<LF> {BOOTLOADER REV}
06:%8x<LF> {DSPA ID}
07:%8x<LF> {DSPA VER}
08:%8x<LF> {DSPB ID}
09:%8x<LF> {DSPB VER}
10:%8x<LF> {CPU PIC32 REV}
11:%8x<LF> {HDMI VER REL}
12:%8x<LF> {KEYPROC PIC16}
13:%8x<LF> {ETHERNET}
14:%8x<LF> {FLASH}
15:%8x<LF> {EEPROM}
16:%8x<LF> {VOLUMECHIP}
17:%8x<LF> {USBAUDIO}
18:%8x<LF> {ZDAC}
19:%18s<LF>{MACADDR[18]}
20:%16s<LF>{NETBIOSNAME[16]}
21:%4d<LF> {MAINBOARD REV}
<CR>
Note: %8x means 8 character hex,
%8d means 8 character decimal,
%12s - 12 chars long string, etc.
ASAV Set auto-save ASAVxx
or force save now
00 OFF any parameter changed
will not be automatically
SP3 PREAMP / PROCESSOR
saved in EEPROM.
(will require ASAVSV
command to save!)
01 ON Automatically saves all
changed parameters (within
2s). Will also force
saving of currently
modified parameters.
SV force save all modified
parameters, without
changing the auto save
status (ON or OFF)
QS query, return auto-save
status
AUFB Set auto-feedback AUFBxx
00 OFF automatic response
on device status change
or button press actions
will not be broadcast
(only the responses to
explicit commands)
01 ON automatic response
will always be sent.
QS query, return the AUFB
status.
____ xx... null command, always ____xx...
ignored, use for
comments (xx.. is
arbitrary ASCII string,
can be empty)
-- END OF FILE --