Develop ineo 4020 User Manual page 303

Action
Step 3
1. Remove held jobs stored in the printer memory.
2. Resend the print job.
Did the job print?
Step 4
1. Disable the Page Protect feature.
From the printer control panel, navigate to:
Settings >General Settings >Print Recovery >Page Protect >Off
2. Resend the print job.
Did the job print?
Step 5
1. Check if the cable connections to the printer and print server are secure.
For more information, see the setup documentation that came with the
printer.
2. Resend the print job.
Did the job print?
Step 6
Install additional printer memory, and then resend the print job.
Did the job print?
Printing slows down
Notes:
• When printing using narrow paper, the printer prints at a reduced speed to prevent damage to the
fuser.
• The printer speed may be reduced when printing for long periods of time, or printing at elevated
temperatures.
User's Guide
- 303 -
Yes No
The problem Go to step 4.
is solved.
The problem Go to step 5.
is solved.
The problem Go to step 6.
is solved.
The problem Contact
is solved. technical
support.