Installation Instructions - Equator EZ 4000 CV Owner's Manual

DANGER
！
Frozen hoses can tear/burst. Do not install the
washing machine outdoors or in an area exposed
to freezing condition.
If the washing machine is located in a room which
will be exposed to temperatures below freezing
point, or if it is located in a cabin that is being shut
down for the winter, any residual water in the pump
or water inlet hoses must be drained.
Do not hold on to protruding parts (e.g. loading door)
when lifting.
Disposing of the packaging
The shipping package has protected your new
washing machine on its way to your home.
All packaging materials are non-polluting and
recyclable. Please contribute to a better
environment by disposing of packaging materials
in an environmentally conscious manner.
DANGER
！
Keep children away from shipping carton and
packaging components. Danger of suffocation
from plastic foil and folding cartons.
Disposing of your old appliance
Old appliances are not worthless trash! Valuable raw
materials can be recycled from old appliances.
To prevent children from locking themselves in the
appliance, disable the door lock or remove the door.
Factory-supplied equipment
！
Inside the drum there is a packet of accessory parts
supplied with your washer. Check that all the
accessory parts supplied for your model are there. If
any parts are missing contact your dealer.
Any residual moisture inside the drum is due to the
final testing which every washing machine
undergoes before leaving the factory.
Installation area
Appliance stability is very important otherwise
the washing machine could "wander" during
the spin cycles.
The installation area must be solid and even. Soft
floor surfaces, such as carpets or surfaces with
foam backing, are not suitable.
Removing the shipping rods
！
The shipping rods must be removed before using
the appliance for the first time and must be
retained for any future transport(e.g. when
moving).
7
DANGER
！
CAUTION
！
！
！