0
Minimum Installation Clearances
When installed in alcove: Sides, Rear, Top = 0" (0cm)
When installed in closet: Sides, Rear, Top = 0" (0cm), Front = 1" (2.54cm)
Consideration must be given to provide adequate clearance for installation and service.
Mobile Home Installation
Installation must conform to Standard for Mobile Homes, ANSI A119.1 and National Mobile home
Construction and Safety Standards Act of 1974 (PL93-383).
The appliance must be attached to the floor according to ADA Compliance given below.
Fig. 9
14