Chilled Water; Ice Cubes And Crushed Ice - Miele F 1471 Vi Operating And Installation Instructions

Ice/water dispenser

Chilled water

^ Place a large container on the drip
tray cover.
^ Touch and keep your finger on the
chilled water sensor.
Chilled water will be dispensed from
the spout as long as the sensor is being
touched.
After a while, dispensing will stop
automatically. Press the sensor again if
you wish to dispense more water.
Fill the container with ice cubes
beforehand if you want it to be
colder.

Ice cubes and crushed ice

Remember it can take up to 24
hours to produce the first ice cubes
after switching on for the first time.
^ Place a large container on the drip
tray cover.
^ Touch and keep your finger on the
sensor for ice cubes or crushed ice.
Ice cubes will be dispensed from the
spout as long as the sensor is being
touched.
After a while, dispensing will stop
automatically. Press the sensor again if
you wish to dispense more ice.
32
Take your finger off the sensor when
the glass or jug is almost full.
Otherwise it will overfill or the ice will
block the dispensing spout.
The ice cube maker can make up to
150 ice cubes in 24 hours.
The amount of ice cubes which the
appliance makes depends on the
temperature in the freezer. The lower
the temperature, the more ice cubes
are produced within a certain time
frame.
If the 0 sensor is flashing, the drip
tray needs to be emptied and
dispensing is stopped automatically.
Mop out the drip tray with a sponge
or cloth.
If the appliance has been switched
off for a long period of time, discard
the chilled water and ice that is
produced in the 24 hours after the
appliance has been switched on
again.