Floor; Door Hinging; Adjoining Furniture/Units; Ventilation - Miele F 1471 Vi Operating And Installation Instructions

Safe operation of the appliance is
only assured if it has been installed
and connected in accordance with
these operating and installation
instructions.
Warning!
This appliance is very heavy and
can tip forwards when the door is
open. Keep the door shut until the
appliance has been built in and
secured within the building-in niche
in accordance with these
instructions.
Due to the size and weight of the
appliance, installation must be
carried out by two people.
The weight of the appliance when
empty is:
F 1471 Vi . . . . . . . . . . . . . . . . . . 139 kg
Installation advice

Floor

To ensure the safe installation of the
appliance and to guarantee its correct
functioning, the floor in the niche where
the appliance is to be installed must be
smooth and even.
It must be made from strong, rigid
material.
The appliance is extremely heavy when
fully loaded, and for this reason it is
imperative that the floor it stands on is
able to bear its weight. If necessary, the
advice of an architect or structural
engineer should be sought.
When fully loaded, the approx. weight
of the appliance is:
F 1471 Vi . . . . . . . . . . . . . . . . . . 228 kg

Door hinging

The appliance is supplied with fixed
hinges. It is not possible to change
the door hinging to the other side.

Adjoining furniture/units

The appliance is screwed to the
adjoining furniture/units to the side and
above.
For this reason, it is essential that all
furniture/units be fixed to the ground
and/or wall.

Ventilation

The air vents must not be covered or
blocked in any way.
They should be dusted on a regular
basis.
57