Moxa Technologies DA-683 Series Quick Installation Manual

DA-683 Quick Installation Guide
Se cond Edition, February 2011
1. Overview
The DA-683 computers are based on the Intel x86 proce
support DVI-I, 6 Gi gabit Ethernet ports, 2 RS-232 serial ports,
CompactFlash, and USB. The DA-683 comes in a stan
2U high form factor.
With the Core Duo processor, the DA-683 can pe
industrial tasks yet con sume little power, ensuring a cost-effective
solution for industrial applications. Two slots available fo
expansion modules provide the great flexibility in sys
integration and expansion.
The DA-683 runs Linux, or Windows XP Embedde
to provide a familiar environment for developing
application software. Moxa's comprehensive softw
makes the programmer's job easier, and he
develop bug-free code quickly and at a lower cost.
2. Model Names and Package Checklis
T he DA-683 Series includes the following models:
• DA-683-SP-XPE: x86 Ready-to-Run Rackmount Co
with 1.66 GHz CPU, DVI-I, 6 Giga LANs, 2 RS-232 Se
4 DI + 4DO, 2 Peripherals Expansion Slots, Compact
USB, Single Power, Windows Embedded Stand
operating temperature
• DA-683-SP-LX: x86 Ready-to-Run Rackmount Com
with 1.66 GHz CPU, DVI-I, 6 Giga LANs, 2 RS-232 Se
4 DI + 4DO, 2 Peripherals Expansion Slots, CompactFl
USB, Single Power, Linux, -10 to 60°C operating tem
• DA-683-DPP-T-XPE: IEC 61850-3 x86 Ready-to
Rackmount Computer with 1.66 GHz CPU, DVI-I, 6 G
2 RS-232 Serial Po rts, 4 DI + 4 DO, 2 Peripherals Expansion
Slots, CompactFlash, 4 USB, Dual Power, Windows E
Standard, -40 to 70°C operating temperature
• DA-683-DPP-T-LX: IE C 61850-3 x86 Ready-to-Run
Rackmount Computer w ith 1.66GHz CPU, VGA, 6 Giga LANs, 2
RS-232 Serial Ports, 4 DI + 4 DO, 2 Peripherals Expansion
Slots, CompactFlash, 4 USB, Dual Power, Linux, -40 to 70°C
operating temperature.
Each basic system model is shipped with following standard items:
• DA-683 basic unit
• Quick Installation Guide
• Document & Software CD
P/N: 1802006830011
– 1 –
• Ethernet Cable: RJ45 to RJ45 cross-
• Product Warranty Statement
Optional Expansion Modules:
• DA-SP08-I-DB: 8-port RS-232/422/4
DB9 connector and digital isolation
• DA-SP08-DB: 8-port RS-232/422/485
DB9 connector
• DA-SP08-I-TB: 8-port RS-232/422
terminal block connector and digita
ssor and
• DA-SP38-I-TB: 8-port RS-422/
terminal block connector and
dard 19-inch ,
• DA-SW08-RJ: 8-port 10/
module
• DA-LN04-RJ: 4-port 10/100 Mb
rform many
• DA-UPCI-DK: U
r
NOTE: Additional
tem
development.

3. Hardware Installation

d (pre -installed),
sophist icated Front View
a re support
lps programm ers
t
mputer
rial Ports,
19-inch Rackmount Ear
Flash, 4
Rear View
ard, -10 to 60°C
puter
rial Ports,
ash, 4
perature
-Run
iga LANs,
19-inch
Rackmount Ear
mbedded
NOTE Expansion modules can be installed
B. For example, in the above figu
DA-LN04-RJ is installed in Slot A and the serial port module
DA-SP08-I-DB is installed in Slot B.
Connecting the Power
DA-683 offers both single power and dual power inputs. Please use
a screwdriver to remove the screws. Connect the power cord to the
screws, and then attach the screws to the unit. For single power
models (SP), use Power 1 only; for dual power models (DPP-T),
over cab
8 5 serial module with
serial module with
/485 serial module with
l isolation
485 serial module with
digital isolation
10 0 Mbps unmanaged switch
ps LAN module
niversal PCI development kit
expansion modules are currently un
(Programmable x 8)
Module Slot A Module Slot B
(Serial, Tx x 2, Rx x 2)
LED x 16 LED x 16
(Gigabit LAN x 12)
(Serial/LAN)
(Serial/LAN)
LED (Power, Storage)
RS-232 Serial Port x 2
Module Slot A Module Slot B
Power
DVI-I
PS/2 Power
Input 1
USB 2.0 Switch
DI x 4, DO x 4
10/100/1000 Mbps
Ground
Host x 2
(Terminal Block)
Ethernet x 6
LED (Power, Storage)
in either Slot A or Slot
re the LAN port module
– 2 –
le, 100 cm use both Power 1 and Power 2.
detailed information. When finish
button to start the system. It will take about 30 to 60 seconds for
your operating system to boot up.
SP Models
PWR 1
+
NC
NC
L
NC
N
Power 1
+
L
N
Chassis Ground
der
For more detailed power connect
information, please refer to the
Reset Button
Pressing the Reset button initiate
button plays the same role as a d
LED
pressing the reset button, the sy
Reset Button
Front Panel LED
There are 6 0 LED indicators on the front panel. Information about
each LED is given in the followi
1 and Port 2, are temporaril
LED Name Color
USB 2.0 Power Green
Host x 2
Off
Storage Yellow /
Blinking
(DB 9 Male)
Off
Ethernet Port Green
1000 Mbps Off
Ethernet Port Yellow
100 Mbps
Off
Power
Serial Port TX Green
Input 2
1-2
Off
Serial Port RX Yellow
1-2
Off
Module Slot A Green
Orange
Module Slot B Green
Orange
Refer to the following figure for
ed, press the Power Switch
DPP-T Models
PWR 1 PWR 2
+ +
NC
L L
NC NC
NC
N N
NC NC
Power 1 Power 2
Surge Ground Chassis Ground
+ +
L L
N N
Chassis Ground Surge Ground
ion and surge protection
Hardware User's Manual.
s a hardware warm reboot. The
esktop PC's reset button. After
stem will reboot automatically.
s
ng table. Additional ports LEDs, Port
y reserved.
LED Description
Power is on
No power input or power error
Data is being written to or to read
from the storage unit
Storage unit is idle
1000 Mbps of Ethernet port is active
No activity
100 Mbps of Ethernet port is active
10 Mbps or no activity
Serial port is transmitting data
No operation
Serial port is receiving data
No operation
Serial port is transmitting data, or 100
Mbps Ethernet port is active
Serial port is receiving data, or 10
Mbps Ethernet port is active
Serial port is transmitting data, or 100
Mbps Ethernet port is active
Serial port is receiving data, or 10
Mbps Ethernet port is active
– 3 –