Advertisement
Quick Installation Guide
x86 Rackmount Embedded Computers
Moxa Americas:
Toll-free: 1-888-669-2872
Tel:
1-714-528-6777
Fax:
1-714-528-6778
Moxa Europe:
Tel:
+49-89-3 70 03 99-0
Fax:
+49-89-3 70 03 99-99
Moxa India:
Tel:
+91-80-4172-9088
Fax:
+91-80-4132-1045
DA-681A Series
Edition 1.0, November 2015
Technical Support Contact Information
www.moxa.com/support
2015 Moxa Inc. All rights reserved.
Moxa China (Shanghai office):
Toll-free: 800-820-5036
Tel:
+86-21-5258-9955
Fax:
+86-21-5258-5505
Moxa Asia-Pacific:
Tel:
+886-2-8919-1230
Fax:
+886-2-8919-1231
P/N: 1802006810030
*1802006810030*
Advertisement
Table of Contents
Related Manuals for Moxa Technologies DA-681A Series
Summary of Contents for Moxa Technologies DA-681A Series
-
Page 1: Quick Installation Guide
DA-681A Series Quick Installation Guide x86 Rackmount Embedded Computers Edition 1.0, November 2015 Technical Support Contact Information www.moxa.com/support Moxa Americas: Moxa China (Shanghai office): Toll-free: 1-888-669-2872 Toll-free: 800-820-5036 Tel: 1-714-528-6777 Tel: +86-21-5258-9955 Fax: 1-714-528-6778 Fax: +86-21-5258-5505 Moxa Europe: Moxa Asia-Pacific:... -
Page 2: Package Checklist
Overview The Moxa DA-681A Series x86-based rack-mount embedded computers are designed for control, monitoring, data acquisition, and protocol conversion applications. With its robust design, the DA-681A is suitable for industrial automation applications, such as power automation, transportation, and oil and gas. - Page 3 Connecting the Power The DA-681A offers both single power and dual power inputs. Use a phillips screwdriver to remove the terminal clamp screws. Connect the power cord to the screws, and then fasten the screws to the unit. Refer to the following figure for detailed information.
- Page 4 SP Model Power Terminal Block Pin Assignment Terminal Description Note Number No function Line/DC+ Line/DC+ is connected to the positive (+) terminal if the power source is DC, or to the Line terminal if the power source is AC. No function Neutral/DC–...
-
Page 5: Reset Button
Front Panel LEDs There are 46 LED indicators on the front panel. Information about each LED is given in the following table. Color Description Green Serial port is transmitting data Serial Port TX 1-12 Not operating Yellow Serial port is receiving data Serial Port RX 1-12 Not operating... -
Page 6: Configuring The Ethernet Interface
Terminal Block Pin Assignment Ethernet Ports The DA-681A has 6 10/100/1000 Mbps LAN ports with RJ45 connectors. The pin assignments for the ports are shown in the following table: Pin No. 10/100 Mbps 1000 Mbps TRD(0)+ TRD(0)- TRD(1)+ – TRD(2)+ –... -
Page 7: Network Connections
If you wish to set an interface for static IP addressing, then use the following configuration. Each interface must be configured with separate entries in the network/interfaces file; LAN1 corresponds to eth0, LAN 2 corresponds to eth1, and so forth for the remaining interfaces. # The loopback network interface auto lo iface lo inet loopback...
Need help?
Do you have a question about the DA-681A Series and is the answer not in the manual?
Questions and answers