Table of Contents
Advertisement
Frequently asked questions
Problem
The oven does not heat
up.
Power Failure - Program
appears in the
Canceled
display.
appears in the
12:00
display.
Maximum operating duration
appears in the
reached
display.
appears in
Fault XX
the display.
appears
Door not locked
in the display.
Door not released
in the display.
No signal to roast probe.
Reposition roast probe in the
appears in the
oven.
display.
136
Possible cause and solution
Demo mode is activated.
The oven can be operated but will not heat up.
Deactivate Demo mode (see "Settings –
Showroom Program").
There has been a power failure which has caused the
current cooking process to stop.
Turn the oven off and then back on again.
Restart the cooking process.
The power supply was interrupted for longer than 200
hours.
Reset the date and time.
The oven was operated for an unusually long period
of time. The Safety cut-out feature has been
activated.
Confirm with OK. Clear the message
Finished
The oven is now ready to use.
A fault has occurred that you cannot resolve.
Contact Miele Technical Service.
The Self Cleaning program door lock is not locking.
Turn the oven off and then back on again. Then
restart the Self Clean program.
If the message appears again, contact Miele
Technical Service.
appears
The door lock for the Self Clean program will not
deactivate.
Turn the oven off and then back on again.
If the door lock still does not deactivate itself,
contact Miele.
The wireless roast probe is not recognized.
Reposition the probe in the food.
If the oven still does not recognize the wireless roast
probe, it may be faulty. A replacement roast probe
can be ordered from Miele.
by selecting "Back".
Program
Advertisement
Table of Contents
