Table of Contents
Advertisement
3. Press [UP] or [DOWN] button to select "WHIT", "STRB""
4. Press [ENTER] to confirm or Press [MODE/ESC] to return to the main menu.
"TIME" – Operating Hours
These functions will detail different time functions associated with the fixture.
<LIFE> (0000~9999 Hours)
This function tracks the running time of the fixture from the point it was last
cleared.
Where "XXXX "represents the total number of running hours. This time is
none
destructive and will remain in the fixtures memory indefinitely. Use this time
to track
rentals or show durations.
<CODE> Clear run time access code
This lock-out code prevents the current run time from being erased accidently.
The
access code is "038"
<CLFE> Clear Fixture Run Time
This function resets the run time to zero.
"Edit" Internal Program Settings:
The fixture comes equipped with a built-in DMX recorder that allows custom
programs to be installed and recalled directly from the fixture's control board.
Programs can be created and stored using the fixture's control board or by using an
external DMX controller. For detailed instructions on how to complete this task please
see "Working with Built-In Programs" Section 11/ Page 27.
Select program – This function allows the user to select one of ten of the user
defined built-in programs. This program is then accessed in "Function Mode"
under
"Program Run."
REC – Auto save function.
Edit program – This function allows the user to edit the built-in programs.
-
-
１１
XM605-V1.0-NR
Advertisement
Table of Contents
