Table of Contents
Advertisement
Main Menu Functions
- "MODE" - Function Mode:
<ADDR> - DMX address setting – This function is used to set or adjust the fixture's
starting DMX address. Every device controlled by DMX has to have a unique starting
address. The addressing feature is what allows DMX to function properly. The DMX
address of a fixture is what allows it to communicate with a controller properly. The
DMX addressing also allows the fixture to ignore any DMX information coming from
the controller that is not meant specifically for the fixture. Because each fixture is
connected in a daisy-chain fashion it is imperative to assign a proper and unique
starting DMX address to each and every fixture. The DMX address is non-destructive
and will remain in the fixture's memory even when the power to the unit is switched
off. Memory is backed-up and retain by an internal power source that should last
about five years.
"VALU" - Display the DMX 512 value of each channel
With this function you can display the DMX 512 value of each channel. The
display will automatically detail the changing DMX values as they are received
from the controller.
"SLAV" - Slave setting for Master/Slave Operation
With this function, you can define the device as slave for operation in
Master/Slave mode. Each slave setting will have a different function for a
dynamic lightshow without a controller.
"RDMX" - Address via DMX - This function allows the DMX address to
remotely be adjusted from a DMX console. This setting requires special settings
for both the controller and the fixture. RDMX is on by default. For operational
instructions please see Section 9/Page 23 of this manual "Remote DMX
addressing."
<RUN> - Internal Program Settings
This function allows the internal programs to run in either stand-alone or master/salve
mode. In "Master" mode the fixture will send DMX data to other fixtures connect via
the DMX chain. In "Alone" mode the fixture will operate as a single fixture. The
program for this mode is selected in the "Select program" section of the control
-
-
８
XM605-V1.0-NR
Advertisement
Table of Contents
