Data-Transfer Mode; System Requirements - Konica Minolta DiMAGE DiMAGE Z6 Instruction Manual

DATA-TRANSFER MODE

Read this section carefully before connecting the camera to a computer. This manual
does not cover the basic operation of computers or their operating systems; please refer
to the manual supplied with your computer.

SYSTEM REQUIREMENTS

For the camera to be connected directly to the computer and used as a mass-storage
device, the computer must be equipped with a USB port as a standard interface. Both the
computer and the operating system must be guaranteed by their manufacturers to
support USB interface. The following operating systems are compatible with the camera:
Windows 98, 98SE, Me, 2000 Professional, and XP Home and Professional editions
Mac OS 9.0~9.2.2 and Mac OS X 10.1.3~10.1.5, 10.2.1~10.2.8, 10.3~10.3.9, 10.4~10.4.1
Check the Konica Minolta web site for the latest compatibility information:
North America:
Europe:
Users with Windows 98 or 98 second edition will need to install the driver software on the
included Digital Camera Software CD-ROM (p. 103). No special driver software is
required for other Windows or Macintosh operating systems.
Customers who have bought a previous DiMAGE or Dynax/Maxxum digital camera and
have installed the Windows 98 driver software must repeat the installation procedure.
The updated version of the driver software included on the supplied Digital Camera
Software CD-ROM is required for the operation of the DiMAGE Z6 with a computer. The
new software will have no affect on the performance of older DiMAGE cameras.
A remote camera driver is supplied in the Windows edition of the Digital Camera Software
CD-ROM. The driver is not compatible with this camera.
100 D -
ATA TRANSFER MODE
http://kmpi.konicaminolta.us/
http://www.konicaminoltasupport.com