Setting The Date And Time - Konica Minolta DiMAGE DiMAGE Z6 Instruction Manual

SETTING THE DATE AND TIME

Set date and time?
Yes No
Date/Time set
2005 . 1. 1
0 : 0
MM / DD / YYYY
:move :sel. :enter
Date/Time setup screen
18 G
ETTING UP AND RUNNING
After initially inserting a memory card and batteries,
the camera's clock and calendar must be set. When
images are recorded, the image data is saved with
the date and time of recording.
If the clock and calendar have not been set, a
1
message is displayed for a few seconds each time
the camera is turned on. This message is also
displayed if the clock and calendar reset when the
camera is stored without batteries for a long period.
Use the left and right keys of the controller (1)
to select "Yes." "No" cancels the operation.
Press the center of the controller to open the
date/time setup screen.
Use the left and right keys to select the item to
be changed.
Use the up and down keys to adjust the item.
Press the central button to set the clock and
calendar.
The date/time setup screen can be opened in section 2 of
the setup menu.