Full-Time Af; Flash Mode; Flash Compensation - Konica Minolta DiMAGE DiMAGE Z6 Instruction Manual

FULL-TIME AF

With full-time AF active, the autofocus systems continually focuses to keep the monitor
image sharp. This also reduces the autofocusing time when taking pictures. When the
camera is set to manual focus, full-time AF is disabled. Turning the full-time AF function
off can help conserve battery power. Full-time AF can be turned on and off in section 2
of the P, A, S, and M menus (p. 44).
Full-time AF is active regardless of the menu setting when using macro in auto-recording
or with a Digital Subject Program as well as when using the sports action digital subject
program. When the red low-battery warning is displayed, full-time AF is disabled.

FLASH MODE

The flash modes can be changed in section 2 of the P, A, S,
and M menus (p. 44). This menu option is used when
another function is assigned to the flash mode button, see
page 67 on the custom key function. For more on flash
modes, refer to page 26.

FLASH COMPENSATION

Flash compensation increases or decreases the flash exposure of the built-in flash in
reference to the ambient exposure by as much as ±2 Ev.
Select the flash compensation option section 2 of the P, A,
S, and M menus (p. 44). Use the up/down keys to adjust the
degree of compensation. Press the central controller button
to set this value. If any value other than 0.0 is set, an
indicator is displayed on the monitor as a warning.
62 A
DVANCED RECORDING
Focus mode Single AF
Full-time AF Off
Flash mode Autoflash
Flash comp. 0
Metering mode MultiSegment
Focus mode
Full-time AF
Flash mode –2 ~ +2
Flash comp. +0.3
Metering mode