Data-Transfer Mode; System Requirements - Konica Minolta Dimage G600 Instruction Manual

DATA-TRANSFER MODE

Read this section carefully before connecting the camera to a computer. Details on using
and installing the DiMAGE Viewer software are found in the supplied software manual.
The DiMAGE manuals do not cover the basic operation of computers or their operating
systems; please refer to the manual supplied with your computer.

SYSTEM REQUIREMENTS

For the camera to be connected directly to the computer and used as a mass-storage
device, the computer must be equipped with a USB port as a standard interface. The
computer and the operating system must be guaranteed by their manufacturers to
support USB interface. The following operating systems are compatible with the camera:
Windows 98, 98SE, Me, 2000 Professional, and XP home and professional editions.
Mac OS 9.0 ~ 9.2.2 and Mac OS X 10.1.3 - 10.1.5, 10.2.1 ~ 10.2.8, 10.3 ~10.3.2.
Check the Konica Minolta web site for the latest compatibility information:
North America:
Europe:
Users with Windows 98 or 98 second edition will need to install the driver software on the
included DiMAGE Viewer CD-ROM (p. 85). No special driver software is required for
other Windows or Macintosh operating systems.
Customers who have bought a previous DiMAGE digital camera and have installed the
Windows 98 driver software must repeat the installation procedure. The updated version
of the driver software included on the supplied DiMAGE Viewer CD-ROM is required for
the operation of the DiMAGE G600 with a computer. The new software will have no affect
on the performance of older DiMAGE cameras.
A remote camera driver is supplied with the Windows edition of the DiMAGE Viewer. The
driver is not compatible with this camera.
Downloaded From camera-usermanual.com Minolta Manuals
http://www.konicaminolta.us/
http://www.konicaminoltasupport.com
83