Appendix; Troubleshooting - Konica Minolta DiMAGE DiMAGE Z6 Instruction Manual

APPENDIX

TROUBLESHOOTING

The section covers minor problems with basic camera operation. For major problems or
damage, or if a problem continues to reoccur frequently, contact a Konica Minolta service
facility.
Problem Symptom
Access lamp
turns red when
pressing the
main switch
The camera
will not
work.
Nothing dis-
played on the
monitors.
Pictures are Focus signal is
not sharp. red.
122 A
PPENDIX
Cause
The batteries are dead.
Batteries are inserted
incorrectly.
Subject is too close.
The camera is in macro
mode.
A special situation is
preventing the autofo-
cus system from focus-
ing (p. 25).
Solution
Replace batteries (p. 13).
Reinsert the batteries taking care
that the negative and positive ter-
minals are oriented as indicated
on the inside of the battery cham-
ber door (p. 13).
Make sure the subject is within
the autofocus range (p. 24) or
use the macro mode (p. 35).
Cancel the macro mode setting
(p. 35).
Use the focus-lock function to
focus on an object at the same
distance as the subject (p. 24) or
use manual focus (p. 59).