Image Size And Image Quality - Konica Minolta DiMAGE DiMAGE Z6 Instruction Manual

IMAGE SIZE AND IMAGE QUALITY

Changing image size affects the number of pixels in
each image. The greater the image size, the larger
the file size. Choose image size based on the final
use of the image - smaller images will be more
suitable for web sites whereas larger sizes will
produce higher quality prints.
Image quality controls the rate of compression, but has no effect on the number of pixels
in the image. The higher the image quality, the lower the rate of compression and the
larger the file sizes. If economical use of the memory card is important, use the economy
mode. Standard image quality is sufficient for normal usage. The fine mode produces the
highest quality image and the largest image files.
Image size and quality must be set before the picture is taken. Changes are displayed
on the LCD monitor. Changes made on one menu affects all exposure modes except
movie. Image size and quality must be reset manually. See navigating the recording
mode menu section on page 44.
If image size or quality are changed, the frame counter displays the approximate number
of images that can be recorded at that setting on the installed memory card. One memory
card can contain images with differing sizes and qualities. The number of images that can
be stored on a memory card is determined by the size of the card and the file size of the
images. The actual file size is determined by the scene; some subjects can be
compressed further than others. See the chart on the following page.
54 A
DVANCED RECORDING
FINE Fine - high-quality JPEG image.
STD. Standard - the default setting. (JPEG)
ECON. Economy - the smallest file sizes. (JPEG)
Number of pixels
LCD monitor
(hor. X vert.)
2816 2816 X 2112
2272 2272 X 1704
1600 1600 X 1200
640 640 X 480