Color Mode; Contrast - Konica Minolta DiMAGE DiMAGE Z6 Instruction Manual

COLOR MODE

The color mode controls whether an image is color or
black and white. This must be set before the image is
recorded. The color mode is set in section 3 of the P, A,
S, and M menus and section 2 of the movie menu (p. 44).
The live image reflects the selected color mode. The
color mode has no effect on image file size.
Natural Color reproduces the colors in the scene
faithfully. This mode uses no monitor indicator when
active. Vivid Color increases the saturation of the colors
in the scene. Black & White produces neutral
monochrome images. The sepia mode creates warm-
tone monochrome images.

CONTRAST

This function increases or decreases the contrast of the scene in three levels: high (+),
normal, and low (–). This can be set in section 3 of the P, A, S, and M menus (p. 44). Any
changes made are applied to the live image. If any level except normal is selected, an
indicator appears on the monitor as a warning.
Contrast: low
Contrast: normal
Vivid Color
Black & White
Sepia
Contrast: high
65