Inserting Batteries - Konica Minolta DiMAGE DiMAGE Z6 Instruction Manual

INSERTING BATTERIES

This digital camera uses four AA-size alkaline or Ni-MH batteries. Do not use other types
of AA batteries. The camera should be off when replacing batteries.
2
1
3
Camera notes
After initially inserting a charged battery, do not remove it from the camera for twenty-four
hours; the camera can be off during this period. The main batteries are used to charge an
internal battery, which protects settings when the camera is turned off.
To open the battery-chamber door, slide the door toward the side
of the camera (1) to release the safety catch. Lift the door to open
(2).
Insert the batteries as indicated on the diagram on the inside of
the battery-chamber door. Confirm the positive and negative
battery terminals are oriented correctly.
Close the battery-chamber door and slide it toward the body (3) to
engage the safety catch.
After installing the batteries, the set-time/date message may
appear on the monitor. The clock and calendar are set in section
2 of the setup menu (p. 18).
13