Movie Editing - Konica Minolta DiMAGE DiMAGE Z6 Instruction Manual

MOVIE EDITING

The edit-movie option in section 1 of the playback menu
allows an unwanted section to be cut from a movie clip.
The movie to be edited must first be displayed in the
playback mode before opening the playback menu.
Highlight "Enter" in the movie edit option and press the
center button of the controller to open the editing screen.
This function cannot be used if the low-battery warning is
displayed.
Function menu
Find 1st frame of cut.
:function :find
Find last frame of cut.
:function :find
78 A
DVANCED PLAYBACK
The function menu indicates the active step in the
editing procedure. The up/down key selects functions.
Use the left/right keys of the controller to display the
first frame of the section to be cut. The bar under the
image and the timer in the top right corner of the screen
show the approximate location of the point.
Use the down key to select the next step.
Use the left/right keys of the controller to display the
last frame of the section to be cut. The bar under the
image and the timer in the top right corner of the screen
show the approximate location of the point.
Use the down key to select the next step.
Delete –
Format –
Lock –
Edit movie –
Copy –