Pictbridge - Konica Minolta DiMAGE A200 Instruction Manual

PICTBRIDGE

Confirm the transfer-mode option in section 1 of the setup
menu is set to PTP. Connect the camera to a PictBridge
compatible printer using the camera's USB cable. The larger
plug on the cable is connected to the printer. Open the
terminal cover and insert the smaller plug of the cable into
the camera. Turn the camera on; the PictBridge screen is
displayed automatically.
Individual still images can be selected for printing on the PictBridge screen. Movie clips,
RAW and images with an embedded color profile (p. 68) cannot be selected. For other
printing options, see the menu navigation section on page 156.
Total number of prints
Number of copies
:move :select :print
Repeat the previous steps until all the images to be printed are selected. Press
the central button of the controller to continue.
On the PictBridge screen, the digital-zoom lever can be used to switch between the
single frame and index playback formats, or to activate enlarged playback to examine
image files.
154
D -
ATA TRANSFER MODE
Use the left/right keys of the controller to
display the image to be printed.
Press the up key to select the number of
copies to be printed. Up to 20 copies can
be printed. To deselect an image for
printing, press the down key until the
number of copies reaches zero.