Changing The Battery - Konica Minolta DiMAGE A200 Instruction Manual

Changing the battery

The remote control battery should be replaced if the self-timer lamp does not blink to
indicate the camera has received a signal from the remote control unit.
The remote control uses a 3V CR2025 lithium battery.
1
Replace the battery as shown with the positive pole down.
Slide the battery chamber back into the remote control until it clicks into place.
Slide and hold the release in the direction
shown (1) and slide the chamber (2) out of
the remote control unit. Take care not to
drop the battery.
2
127