Language; Shortcut Help - Konica Minolta DiMAGE A200 Instruction Manual

LANGUAGE

The language used in the menus can be changed in section 1 of the setup menu. See
page 29 on how to set the language.

SHORTCUT HELP

The shortcut help in section 2 of the setup menu shows
button commands to open the LCD brightness screen,
change the focusing screens, open the setup menu, reset
the camera, or open the custom white-balance calibration
screen. To close the help screen, press the menu button.
The following shortcuts can be used:
Press and hold the display
information button to open the
LCD brightness screen.
To display a grid or scale over the
display formats, press and hold
the shift button (1) and press the
display information button (2) to
cycle through the options: grid,
scale, and off. For more on the
displays format, see page 43.
134
S
ETUP MENU
1
Shortcut help
i button LCDbrightness
SHIFT+i button Focus screens
SHIFT+MenuButt Setup menu
SHIFT+ Reset camera
controller WB. set
Set LCD brightness
Low
:adjust :enter
2
Grid
High
Scale