Inserting And Changing A Memory Card - Konica Minolta DiMAGE A200 Instruction Manual

INSERTING AND CHANGING A MEMORY CARD

Always turn off the camera and confirm the access lamp is not lit
before inserting or removing a memory card, otherwise the card may
be damaged, and data lost.
A memory card must be inserted for the camera to operate. If a card
has not been inserted, a no-card warning will be displayed on the
monitors. Type I and II CompactFlash cards and Microdrives are
compatible with this camera. For memory card care and handling, see
page 166.
Open the card-slot door in the direction indicated.
Insert a memory card all the way into the card slot. Insert the card so
the face is toward the front of the camera. Always push the card in
straight. Never force the card. If the card does not fit, check that it is
oriented correctly.
Close the card-slot door.
Accessory
The CompactFlash Adapter for SD Memory Cards SD-CF1 allows SD (Secure Digital) Memory
Cards or MultiMediaCards to be used with this camera.
22
G
ETTING UP AND RUNNING