Using The Drive-Mode Button - Konica Minolta DiMAGE A200 Instruction Manual

USING THE DRIVE-MODE BUTTON

The drive mode is set with the
drive-mode button. The drive
modes control the rate and
method images are captured.
Indicators showing the selected
drive mode appear
monitors.
2
:move
Single-frame
advance
Self-timer
Remote control
Bracketing
Continuous
advance
76
A
DVANCED RECORDING
on the
Single
:enter
To take a single image each time the shutter-release
button is pressed (p. 30).
To delay the release of the shutter by 2 or 10 seconds.
Used for self-portraits (p. 77).
To operate the camera with the remote control unit (p.
78).
To take a series of three images with differing exposure,
or white balance (p. 80).
To take a series of three images when the shutter-
release button is pressed and held (p. 82).
Press the drive-mode button (1); the
drive-mode setting screen appears.
1
Use the up/down keys of
the controller to highlight
the the new drive mode (2).
Use the left/right keys to
select
options
center of the controller or
press
button partway down to
complete the operation.
Pressing the menu button
cancels the operation.
Also see the camera notes
on page 69.
3
the drive mode
(3). Press the
shutter-release