Changing The Memory Card (Data-Transfer Mode) - Konica Minolta DiMAGE A200 Instruction Manual

CHANGING THE MEMORY CARD (DATA-TRANSFER MODE)

Windows 98 / 98 second edition
1. Turn off the camera.
2. Change the memory card.
3. Turn on the camera to remake the USB connection.
Windows Me, 2000 professional, and XP
1. Stop the USB connection using the unplug-or-eject-hardware routine (p. 150).
2. Turn off the camera.
3. Change the memory card.
4. Turn on the camera to remake the USB connection.
Macintosh
1. Stop the USB connection by dragging the drive icon into the trash (p. 151).
2. Turn off the camera.
3. Change the memory card.
4. Turn on the camera to remake the USB connection.
152
D -
ATA TRANSFER MODE
Care should be taken when changing memory cards while the
camera is attached to the computer. Data could be lost or
damaged if the camera is not properly disconnected. Always
confirm the access lamp is out before removing the memory card.