Konica Minolta DiMAGE A200 Instruction Manual page 31

2
Press the shutter-release button partway down (2) to
lock the focus and exposure.
3
When the focus is set, an AF sensor is displayed in the
live image to indicate the point of focus. The focus
signals (p. 33) on the monitors will confirm that the
image is in focus. If the focus signal is red, the camera
was unable to focus on the subject. Repeat the
previous steps until the signal is white. The shutter
speed and aperture value will change from white to
black indicating the exposure is locked.
Press the shutter-release button all the way down (3) to
take the picture. The access lamp blinks indicating the
image data is being written to the memory card. Never
Focus signal
remove a card while data is being transferred.
AF sensor
Shutter-speed and aperture
31